Electric Power steering
 

Looking for any advice, info, photos etc.

I would like to setup my lightning sprint with power steering. Was it a fairly easy fit? Did you use an ATV or car electric power steering unit? Or did you by one of the kits available. Hoping to run my car 2 nights a week, Wong and non wing, so I’d like to take some of the physical load off. Thanks!

Re: Electric Power steering
 

Here's the units everyone is using - fairly straight forward assembly

https://www.unisteer.com/electric-po...-360w-kit.html

Originally Posted by TJ Domark:
Here's the units everyone is using - fairly straight forward assembly

https://www.unisteer.com/electric-po...-360w-kit.html

Right, I've seen plenty of pictures of them installed on Micro Sprints. Never seen an installation on a Lightning Sprint with a Schroeder style box. I'm curious as well.

Re: Electric Power steering
 

I use a 17" steering wheel. Problem solved...

That said, I'm sure it wouldn't be real hard to retrofit it to the input shaft of a Schroeder style box. This is a comment from another post on the subject: Henchcraft sells one and it works nice. Get a hold of Them at EMI It’s been done many of times in the lightning sprints. And the hold up just fine. All micros run them . As far as diff between rack and steering box Hench developed a system that works for the Schroeder box . Contact him at EMI

Bill

https://www.speedwaymotors.com/Hench...it,232898.html