Indiana Open Wheel - 2 Midgets for sale parting out

Indiana Open Wheel (https://www.indianaopenwheel.com/index.php)

- Midget Classifieds (https://www.indianaopenwheel.com/forumdisplay.php?f=15)

- - 2 Midgets for sale parting out (https://www.indianaopenwheel.com/showthread.php?t=99641)

Looks like it has come to this, so I will list the parts available for each.
Pavement car. Just got down to the bird cages, and it is a Stewart chassis.
QCS rear end with at least 3 gear changes, looks fresh, will have to pull the cover, and see what ratio it is. 3:73- $500.00 PENDING ?
KSE power steering. Either new, or freshened, looks new. Will have arm, and new steering wheel with quick release, wheel is aluminum. $600.00 SOLD!
New pedal assembly, with masters and bias control, installed, but never used. $150.00
4 new coil over shocks/springs/kits Carrera, mounted, but never ran, numbers on request. $500.00
Complete hub to hub front axle, looks like new MPD spindles and hubs, scalloped rotors, 48", 6 pin. $400.00
Fuel cell and shell, complete with bottom pickup. Must be at least 25 gal. $600.00 SOLD!
3 new 6 pin wheels, Weld I believe, NBL-$150.00 ea
2 nice 31 spline rear wheels, NBL $150.00 ea
Just went to the trailer to take some pic's for an interested racer, I also have a new, oil tank, with mount, and fittings. will price it yet today. It is a Peterson, 6" X 18" with 3 point mount $225.00 PENDING ?
Pavement bird cages, or dirt with the proper hardware. $100.00
What's left of chassis/roller, includes radius rods, motor plate, misc bolts and etc. Hood, side panels, dzus buttons. $400.00

Also I have an in car adjuster for rear end engagement, or spring.

Just ask, I probably have it, every time I go to the trailer, or warehouse, I find something I had forgotten about!

Vintage dirt car: Chassis, great shape, was built for a Chevy II, includes front axle, bars, arms, stops, radiator, brass, hood, misc bolts and stuff, plus a Schroeder steering wheel, 3 spoke, and nose pad. $300.00 SOLD

Text me for pictures, specify what you want to see @ 812-528-1820. Bob
The power steering has been sold.

Re: 2 Midgets for sale parting out

I've about got enough room now, that I can take individual pictures of what you might be interested in, such as the pedal assembly, rear axle, fuel tank, front axle, wheels, oil tank and etc, give me a day or 2 to get it to you, it's been a busy week. Thanks! Bob

Re: 2 Midgets for sale parting out

Time to update what I have left, on both cars.
The vintage midget, built by Barnett, for a Chev ll.
Chassis, seat and upholstery, torsion bars, brass radiator, front axle/w tie rod, drag link, radius rods, a few other odds and ends. SOLD
As I have pretty much quit racing, anything, and am following a different path, I am considering selling my TQ midget, lots of parts, tires, wheels, the house car if you want to call it that, many a driver has been in this one. If interested, call me at the number listed, and we can talk.
Thanks! Bob
The Stewart pavement car:
Chassis, complete front axle, hub to hub, 4, ARS coil over shocks/w springs and kits, QCS rear axle, looks like a new 3.78 R&P has been installed, spacers, nuts, 3 gear changes, Peterson 6" X 18" like new oil tank/with Peterson mount, radius rods, sway bars, hood, pavement Hoosiers, Weld wheels, lots of odds and ends.

Text 812-528-1820 for prices and pictures, let me know what you are interested in, I don't want to send out pictures of everything, when all you might be interested in some smaller parts. Thanks! Bob Bump

Re: 2 Midgets for sale parting out

Please send pics of 31 spline wheels 716-432-9101

Re: 2 Midgets for sale parting out

Still have the rearend?

Re: 2 Midgets for sale parting out

Yes I do, sorry for the delay, but I have been installing a new furnace. Bob

Re: 2 Midgets for sale parting out

Quote:

Originally Posted by mac32 (Post 485572)

please send pics of 31 spline wheels 716-432-9101

sent

Re: 2 Midgets for sale parting out

Quote:

Originally Posted by tq29m (Post 485918)

sent

sold!

Re: 2 Midgets for sale parting out

Quote:

Originally Posted by TQ29m (Post 485986)

sold!

Not sold, still for sale. $125.00 ea+ shipping!

SOLD!!!!

SOLD!
Still have pavement chassis, shocks and spring kits, complete front axle with oiler hubs, 3 NOS Weld 6pin wheels, chassis will go cheap, it is a Stewart as near as I can tell, will have panels, hood, front and rear sway bars, nerfs, bumpers, radius rods + spares. Getting low on parts, sold my trailer, about to run out of storage space. Pics on request. OOPS, almost forgot, I still have the QCS rear end, w/1gear change, and what looks like a new 3:73 r&p , and I do have a brake hub for it, no rotor tho, but that's easy. $400.00 for it, spacers and nuts included! Thanks!
Text 812-528-1820

Re: 2 Midgets for sale parting out

Quote:

Originally Posted by TQ29m (Post 486582)

SOLD!
Still have pavement chassis, SOLD shocks and spring kits SOLD complete front axle with oiler hubs, 3 NOS Weld 6pin wheels, chassis will go cheap, it is a Stewart as near as I can tell, will have panels, hood, front and rear sway bars, nerfs, bumpers, radius rods + spares. Getting low on parts, sold my trailer, about to run out of storage space. Pics on request. OOPS, almost forgot, I still have the QCS rear end, w/1gear change, and what looks like a new 3:73 r&p , and I do have a brake hub for it, no rotor tho, but that's easy. $400.00 for it, spacers and nuts included! Thanks!
Text 812-528-1820

Front axle is sold, still have chassis, Hoosier pavement tires, SOLD oil tank and mount SOLD , Weld 6 pin front wheels, 8", lots of smalls, couple of radiators, let me know what you need, I may have it! Bob

Oil tank is sold, maybe the shocks and spring kits. SOLD

looking for ignition digital system

Re: 2 Midgets for sale parting out

No, only thing I got in the ignition line is a Dyna, with the adjustable settings on it. Do have a QCS rear end left, w/brake hub and one gear set. Thanks